REFU Elektronik GmbH REFUsol 08K ... 23K 19
4.4
Checking scope of delivery
The scope of delivery includes:
• Solar Inverter REFUsol 08K ... 23K
• Wall-mounting bracket
• Supplement with the following content:
o 1x 5-pin contact insert, IP67, VC-TFS5-PEA for grid connection
o 1x adapter housing IP67 VC-K-T3-R (10-25) PLOMB for grid connection
o 2x cross-recessed flat-head screw, M5x20 => for mechanically securing the device in the wall
bracket
o 1x warning label in according UTE C 15-712-1 for installing in France
The screws for attachment to the wall are not included.
The IP67 VC-K-T3-R (10-25) PLOMB adapter housing allows sealing.
4.5
Unpacking the Device
NOTICE
Exposure to moisture, dust, or debris while unmounted in a non-vertical
orientation poses a risk of ingress
Only unpack the device when it is to be installed. Failure to do so voids your
warranty!
The inverters are heaviest at the top. They are therefore packed upside down to facilitate transport. You will
therefore see the bottom side of the device (connectors) after having opened the package. Take the device at
the two holding grips that are visible on the side and remove it from the packaging. When being unpacked,
the device keeps the packaging grid locked in place on its housing. The packaging grid can be used to
deposit the device on the floor. This prevents the cover from being damaged.
Note:
The inverter contains electrolytic capacitors which can be stored for no more
than 1 year and at a storage temperature of ≤ 40 °C / ≤ 104 °F while in a de-
energized state. If the storage time has been exceeded, please contact REFU
Elektronik GmbH Service before connecting the inverter to your system!
To Next Page
Loading...
