EasyManua.ls Logo

REFU REFUsol 08K - Device Start

REFU REFUsol 08K
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36 REFUsol 08K ... 23K REFU Elektronik GmbH
5.2.2
Accepting the Country Code
To be certain, you will be asked whether you wish to accept the country code. After accepting the country
code it can only be changed within 40 hours.
Only confirm the country code if you are absolutely sure it is correct.
If you are not sure, press
ESC
to cancel your selection and correct the selection.
If the country code is to be accepted, then confirm with
OK
.
A restart then takes place:
"ERROR" and "GROUND FAULT" status LEDs flash red alternately.
5.3
Device Start
Solar modules are irradiated with sufficient sunlight.
Country code is set.
Time and date is set.
The following procedure follows:
Self-test All status LEDs are lit for approx. 6 seconds
Check “START” status LED lights orange.
Activation “START” status LED lights orange/LED “ON” flashes green.
Feed in “ON” status LED lights green/normally all other status LEDs are off.
Set Country to
AR-N 4105 ?
Cancel
OK
PAC
8260
W
VAC 405 V
VDC 634 V
E day 27.6 kWh
Reboot
Menue

Table of Contents

Related product manuals