REFU REFUsol 08K - Input of Standardized Data; Menu Structure

REFU Elektronik GmbH REFUsol 08K ... 23K 39
Fig. 24: Energy yield normalized on the display
Press the
ESC
key to return to the basic screen display.
5.9 Input of Standardized Data
To change the normalization, press the
F2
key and enter the currently connected PV generator power as
follows:
keys: Press the key to select the digits before the point.
Press the key to select the digits after the point.
key: Press the key to increment the selected digit by 1.
key: Press the key to decrement the selected digit by 1.
Fig. 25: Standardized data input display
Press the
OK
key to apply the set value.
Press the
ESC
key to discard the value and display the previous “normalized yield” level.
Press the
F1
key to display the menu.
5.10 Menu Structure
The menu structure serves as a support to change to the individual information displays and setting displays.
Energy
/ x kWp
Day : 0.7 kWh
Month : 5.3 kWh
Year : 49.2 kWh
Total : 265.8 kWh
Installed PV [kWp]
15.0