REFUlog – Monitoring portal 37
Configuring Inverters with the PC Software REFUset
REFUsol 100K
982059/02
2020-11
EnglishDeutsch
6 REFUlog – Monitoring portal
The REFUsol 100K inverter can be connected to the
monitoring portal REFUlog using direct Ethernet con-
nection to the internet, or via RS485 and the REFUcon-
trol data-gateway.
Once an internet connection is established, the
inverter will automatically start to send data to REFU-
log every 5 minutes. The sending interval can be
changed with the configuration tool REFUset.
To view the inverter data, open www.refu-log.com
with your browser and login or register as a new user.
You can use the activation code provided on the type
label of the inverter to assign one or more inverter to a
PV system. REFUlog is also available as mobile app for
Android and iOS.
To Next Page
Loading...
