Please read these instructions carefully before mounting and operating the actuator!
Preventive and safety-measures applied on the actuator can not offer required safety level till the actuator and its
safety systems are not applied by required and described way and if installation and maintenance is not applied
according to applicable instructions and rules!
Contents
1. General data......................................................................................................................................................2
1.1 Purpose and applications............................................................................................................................2
1.2 Safety instructions.......................................................................................................................................2
1.3 Data specified on electric actuator..............................................................................................................3
1.4 Warranty conditions.....................................................................................................................................3
1.5 Under-guarantee and after-guarantee service............................................................................................3
1.5.1 Lifetime of actuators................................................................................................................................4
1.6 Operation conditions...................................................................................................................................4
1.6.1 Product location and operation position..................................................................................................4
1.6.2 Operation environment............................................................................................................................4
1.6.3 Power supply and duty cycle...................................................................................................................5
1.7 Conservation, packing, transport, storing and unpacking...........................................................................5
1.8 Appreciation of the product and packing.....................................................................................................6
2. Description, function and specifications............................................................................................................7
2.1 Description and function..............................................................................................................................7
2.2 Basic specifications.....................................................................................................................................8
3. Installation and dismantling of actuator...........................................................................................................11
3.1 Installation.................................................................................................................................................11
3.1.1 Mechanical connection..........................................................................................................................11
3.1.2 Electric connection and checking of function........................................................................................13
3.2 Dismantling................................................................................................................................................14
4. Adjusting of actuator........................................................................................................................................15
4.1 Gear unit adjustment.................................................................................................................................15
4.2 Adjustment of position-indicating unit (Fig.4)............................................................................................15
4.3 Adjustment of resistant transmitter (Fig. 5)...............................................................................................16
4.4 Adjustment of the Electronic Position Transmitter (EPV) - the Resistive Transmitter (Potentiometer) with
the Converter PTK 1............................................................................................................................................16
4.4.1 EPV – the 2-wire version (Fig. 6)..........................................................................................................16
4.4.2 EPV – 3-wire version (Fig. 7)................................................................................................................17
4.5 Adjustment of the Capacitive Transmitter CPT1/A (Fig.8)........................................................................18
4.6 Adjustment of position controller (Fig. 9)...................................................................................................19
4.6.1 Setting of controller...............................................................................................................................19
4.6.2 Watching operation and error states.....................................................................................................20
5. Service, maintenance and troubleshooting.....................................................................................................21
5.1 Service.......................................................................................................................................................21
5.2 Maintenance - extent and periodicity........................................................................................................21
5.3 Troubleshooting.........................................................................................................................................22
6. Accessories and spare parts...........................................................................................................................22
6.1 Accesories.................................................................................................................................................22
6.2 Spare parts list...........................................................................................................................................22
7. Enclosures.......................................................................................................................................................23
7.1 Wiring diagrams.........................................................................................................................................23
7.2 Dimensional drawings Flange ISO 5210...................................................................................................28
7.3 Guarantee service check report................................................................................................................32
7.4 Post guarantee service check report.........................................................................................................33
7.5 Commercial representation.......................................................................................................................34
Edition: 01/2019
The right of changes reserved!
To Next Page
Loading...
Need help?
General
