Launch & Cruise Checklist_______________________
Obtain a current weather report.
Inspect the hull and propeller for damage.
Check all electrical system switches for proper operation.
Run the bilge pump until the fl ow of water stops.
If your boat has been out of the water, check to see that the
drain plug is installed.
Check that all required safety equipment is on board and in good
working condition.
Check that all other equipment is on board such as mooring
lines, tool kit, and extra parts.
Open the engine compartment. Inspect for fuel odors and
visible signs of leaks in the fuel, oil, exhaust, and power steering
systems.
Visually inspect the engine for cracked hoses, defective belts,
loose fasteners, etc. and repair or replace
Check fuel level. Fuel tanks should be fi lled to full capacity.
Make sure all navigational charts, equipment, and vessel
registration paperwork are onboard.
Check operation of bilge blower, steering system, navigation
lights, and horn.
Ensure passengers know how to use safety equipment.
File a fl oat plan with a responsible party ashore.
INT-12
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
