Metal________________________________________
Keep all stainless steel and other metal parts rinsed and wiped dry.
To maintain their fi nish, annually polish the stainless steel and other
bright works. Use commercially available metal products and read
the labels carefully before use. Refer to the fl yer in the owner’s
information pouch. Most marinas and boating retail outlets carry
metal care products.
Optional Flexiteek / Soft Step Mat Inlay___________
An optional inlay of fl exiteek or soft step material is available for your
swim platform and transom walk-thru.
To care for these materials, wash with dishwater solvent and water
immediately after a mark appears.
Hull Bottom___________________________________
NEVER use wire brushes or highly abrasive scouring pads on your
hull bottom. It could damage the gel coat surface or the bottom paint.
The bottom of your boat needs to be clean since the build up of
natural coatings from water or marine life can potentially create drag
and affect your boat’s performance. Contact a marine professional or
Regal dealer for more information.
Frequent Stains________________________________
There are many items that can cause stains to your boat. Some items
can even leave permanent stains. The following table indicates general
steps that should be taken to remove frequent stains.
7-10
Chapter 7
To Next Page
Loading...
