TRIM ANGLE
Stern drive boats have the ability to angle in or out their stern drive
unit in relationship to the transom. This is accomplished by hydraulic
cylinders located on the out drive along with an electrical sender unit
that reads the drive angle and relays the information to the dash trim
gauge.
Purpose Of Power Trim_________________________
The purpose of the power trim/tilt is to enable the operator to change
the angle of the drive while at the helm. Changing the angle of the
drive, or “trimming”, provides the following benefi ts:
Improves acceleration onto a plane.
Maintains boat on plane at reduced throttle settings.
Increased fuel economy.
Provides smoother ride in choppy water.
Increases top speed.
In short, your trim angle is a way of fi ne-tuning the ride of your boat
and will enable you to get the most effi cient and comfortable ride
possible, whatever the conditions.
5-15
Vessel Operation
•
•
•
•
•
To Next Page
Loading...
