STERN DRIVE MAINTENANCE
Each engine and stern drive package is unique and quite complex. A
select portion of the maintenance items are covered in this chapter
including basic periodic maintenance and lubrication specifi cations.
Refer to your propulsion manufacturer’s owner’s manual for complete
details and specifi c information about your propulsion system
maintenance schedule and break-in. The information presented
here is merely a guide to be used on typical packages, and may not
directly apply to your stern drive unit. When performing your own
maintenance, only use marine approved parts on your stern drive. Also
DO NOT use lubricant or fl uids not approved by the manufacturer.
!
WARNING
PREVENT INJURY OR DEATH! USE ONLY MANUFACTURER
APPROVED MARINE REPLACEMENT PARTS THAT ARE
IGNITION PROTECTED.
Marine Approved Replacement Parts Warning
Stern Drives___________________________________
Your stern drive requires maintenance just like your engine. Stern
drives require daily, weekly, monthly, and yearly inspections to keep
your equipment in optimal form.
CHECKING THE WATER PICK-UP FEEDS
Your water pick-up feeds are normally located on your sterndrive.
They consist of a series of holes that raw water can fl ow through,
where it will be picked up by your cooling system. Ensure that these
are not blocked before each trip, or you will risk engine failure.
7-18
Chapter 7
To Next Page
Loading...
