Plastics_______________________________________
Use plastic cleaners and polishes recommended for marine use
only. Use proper applicators. Read all instructions carefully. Test
the product in a small area fi rst. Use a soft rag and always rinse
the surface with water. Ammonia based cleaners and abrasives will
damage plastic parts.
!
NOTICE
NEVER CLEAN PLASTIC SURFACES WITH A DRY CLOTH OR
GLASS CLEANING SOLUTIONS CONTAINING AMMONIA. NEVER
USE SOLVENTS OR WIPE PLASTICS WITH ABRASIVES.
Plastic Care Notice
Fiberglass & Gelcoat___________________________
!
CAUTION
NEVER CLEAN PLASTIC SURFACES WITH A DRY CLOTH OR
GLASS CLEANING SOLUTIONS CONTAINING AMMONIA. NEVER
USE SOLVENTS OR WIPE PLASTICS WITH ABRASIVES.
Fiberglass And Gelcoat Care Caution
Routine maintenance is the only practical way to keep the surface of
your boat looking shiny and new. Most objects left outdoors will
gradually deteriorate from exposure to the sun, water, dust, and
pollution. Such outdoor exposure can cause your boat’s gelcoated
surface to change or fade. Darker colors tend to fade more rapidly than
lighter colors because they absorb more of the sun’s rays (ultraviolet
and infrared).
7-3
Care & Maintenance
To Next Page
Loading...
