After pulling you boat away from the ramp, be sure to go through all
the checks involved before departure. Reinstall the harness connector
and check the lights, brakes, safety chain, winch, hitch, wheel bearings,
and tie downs. Remove the drain plug to drain excess water in the
bilge. Make sure to reinstall the hull drain plug and securely tighten
it. Make sure the boat is prepared properly for trailering before
disembarking.
!
WARNING
AVOID PERSONAL INJURY! DO NOT LET ANYONE STAND NEAR
THE WINCH OR CABLE AS IT COULD BREAK.
Winch Warning
!
CAUTION
HULL BOTTOM DAMAGE COULD RESULT FROM THE BOAT NOT
BEING POSITIONED ON THE ROLLERS, BUT RESTING ON THE
TRAILER FRAME.
Loading Your Boat Caution
10-13
Trailering