6-23
Equipment Operation
1. SCAN
Will flash by itself when All-Scan mode is to be initiated or will flash
in unison with “MEM” when memory scan is to be initiated.
2. 1 W (High/Low Power)
Will be displayed when the transmitter circuits are providing 1 watt
of power to the antenna. When the transmitter is supplying 25 watts
to the antenna, the “1 W” indication will be extinguished.
3. ALT (Weather Alert)
Will blink when a weather alert tone has been detected.
4. WX (Weather)
Will be displayed when the channel selected to be monitored is a
weather channel.
6-23
Equipment Operation
1. SCAN
Will flash by itself when All-Scan mode is to be initiated or will flash
in unison with “MEM” when memory scan is to be initiated.
2. 1 W (High/Low Power)
Will be displayed when the transmitter circuits are providing 1 watt
of power to the antenna. When the transmitter is supplying 25 watts
to the antenna, the “1 W” indication will be extinguished.
3. ALT (Weather Alert)
Will blink when a weather alert tone has been detected.
4. WX (Weather)
Will be displayed when the channel selected to be monitored is a
weather channel.
To Next Page
