Regal 2200 - Page 157

CHAPTER 6
6-24
5. MON (Monitor)
Will be displayed when the MON/INT key is pressed. This indicates
the radio is in the monitor mode.
6. INT (International/USA) Will be displayed when international
channels are programmed for use. “INT” is not displayed when US
channels are programmed for use.
7. TX (Transmit)
Will be displayed on the LCD when the Push-to-Talk (PTT) switch is
depressed indicating the transmitting circuits are providing a signal
to the antenna.
8. MEM (Memory)
Will be displayed when the SCAN key is pressed and held for two
seconds, or when the radio is programmed to the MEMORY SCAN
mode.
9. LCD segments
Will display channel number in use.
CHAPTER 6
6-24
5. MON (Monitor)
Will be displayed when the MON/INT key is pressed. This indicates
the radio is in the monitor mode.
6. INT (International/USA) Will be displayed when international
channels are programmed for use. “INT” is not displayed when US
channels are programmed for use.
7. TX (Transmit)
Will be displayed on the LCD when the Push-to-Talk (PTT) switch is
depressed indicating the transmitting circuits are providing a signal
to the antenna.
8. MEM (Memory)
Will be displayed when the SCAN key is pressed and held for two
seconds, or when the radio is programmed to the MEMORY SCAN
mode.
9. LCD segments
Will display channel number in use.