WHEN THE POWER IS ON, THE SYNTHESIZER
AUTOMATICALLY PROGRAMS FOR THE USA
CHANNEL FREQUENCIES AND SELECTS THE
CALLING CHANNEL 16.
REFER TO 16 PLUS OPERATION
TO CHANGE THIS CHANNEL.
Turning On the Volume
1) Rotate the ON/OFF/VOLUME control clockwise to turn the
radio on.
Setting the Volume
1) Rotate the Squelch control slowly counterclockwise. Background
noise will be heard.
2) Rotate the Volume control for the desired volume level.
Setting the Squelch
1) Rotate the squelch control slowly clockwise until the background
noise ceases.
Setting the Power Output
1) Presss the “MON/1/25 “ key for two seconds to toggle between 1
watt output and 25 watt output. The choice of power output is
dependent upon the distance of transmission and transmitting
conditions. In some US harbors and on certain channels, the radio
autimatically selects the 1 watt power output when the channel is
selected.
Selecting the Channel
1) To select the appropriate channnel, press the up or down channel
select keys.
WHEN THE POWER IS ON, THE SYNTHESIZER
AUTOMATICALLY PROGRAMS FOR THE USA
CHANNEL FREQUENCIES AND SELECTS THE
CALLING CHANNEL 16.
REFER TO 16 PLUS OPERATION
TO CHANGE THIS CHANNEL.
Turning On the Volume
1) Rotate the ON/OFF/VOLUME control clockwise to turn the
radio on.
Setting the Volume
1) Rotate the Squelch control slowly counterclockwise. Background
noise will be heard.
2) Rotate the Volume control for the desired volume level.
Setting the Squelch
1) Rotate the squelch control slowly clockwise until the background
noise ceases.
Setting the Power Output
1) Presss the “MON/1/25 “ key for two seconds to toggle between 1
watt output and 25 watt output. The choice of power output is
dependent upon the distance of transmission and transmitting
conditions. In some US harbors and on certain channels, the radio
autimatically selects the 1 watt power output when the channel is
selected.
Selecting the Channel
1) To select the appropriate channnel, press the up or down channel
select keys.
To Next Page
