EasyManua.ls Logo

Regal 2200 - Page 202

Regal 2200
261 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cosmetic Care & Maintenance
7-21
Stereo
The stereo requires little maintenance. Protect the unit from water,
dirt and ultra-violet damage.When washing the interior do not discharge
water directly at the stereo unit. As with any CD unit clean your CD’s
to keep them from skipping. This process also aids in keeping dust
out of the unit. For further information, refer to your stereo owner’s
manual located in the pouch.
Blower
Check the blower hoses to ensure they are fastened in the bilge properly
and there are no holes in them. The hose connected to the blower
needs to be 3/4 down in the bilge to evacuate fumes properly. Check
all blower hoses to ensure there are no pockets anywhere that can
catch rain water. All hoses should follow a sloped up to down pattern.
All vents need to be checked for debris.
Make sure the blower motor is securely fastened and all hose clamps
and or tie wraps are tight. Also, check the electrical connectors for
tightness.
Cosmetic Care & Maintenance
7-21
Stereo
The stereo requires little maintenance. Protect the unit from water,
dirt and ultra-violet damage.When washing the interior do not discharge
water directly at the stereo unit. As with any CD unit clean your CD’s
to keep them from skipping. This process also aids in keeping dust
out of the unit. For further information, refer to your stereo owner’s
manual located in the pouch.
Blower
Check the blower hoses to ensure they are fastened in the bilge properly
and there are no holes in them. The hose connected to the blower
needs to be 3/4 down in the bilge to evacuate fumes properly. Check
all blower hoses to ensure there are no pockets anywhere that can
catch rain water. All hoses should follow a sloped up to down pattern.
All vents need to be checked for debris.
Make sure the blower motor is securely fastened and all hose clamps
and or tie wraps are tight. Also, check the electrical connectors for
tightness.

Table of Contents

Related product manuals