Equipment Operation
6-57
Toilet-Chemical
Before each outing make sure
the chemical toilet is fi lled with
the proper chemicals, paper is
available, and the holding tank
is empty.
To fill the toilet follow
the manufacturer’s
recommendations for mixing
the solution. Use the fi ll to pour
in the deodorant chemical and
water. By pushing down on the
bellows the chemical mix in
released to rinse and help fl ush
the toilet bowl. When the fl ush
valve is pulled forward the
toilet bowl waste water empties
into the holding tank. Close the fl ush valve after each use.
The chemical toilet features a holding tank level indicator. When full
the lower holding tank must be emptied by fi rst separating it from
the upper toilet bowl assembly. Before proceeding, ensure the fl ush
valve in completely closed. Find the latches that allow the 2 units to
be separated. Once separated, fi nd an environmentally friendly facility
to dispose of the waste.
Fill
Bellows
Holding Tank
To Next Page
Loading...
