Equipment Operation
6-11
Canvas
Canvas packages may include a bimini top with boot, bows and
hardware. In addition, canvas may include a cockpit cover which
encloses an area from the windshield front to the stern.
To install a typical bimini top on models without the optional sport
tower, unzip the top boot and remove it from the bimini top. Store it
for future use. Unroll the
canvas and install both of
the front bimini canvas
straps. Adjust the straps to
make them equal in length.
Install the aft support
stanchions and place them
in the arch mount located
on the deck. Lock each
stanchion with a pin. Make
sure the pin is completely
inserted through the ball
and socket mount.
Note: Sometimes canvas straps can make a noise while underway.
To help deminish the noise simply twist the straps and relatch.
TO PREVENT BODILY INJURY AND PROPERTY
DAMAGE, TOW BOAT
WITH CANVAS UP ZIPPED IN THE BOOT.
CHECK ALL FASTENERS FOR TIGHTNESS.
FOR WATER CRUISE USE,
PLACE THE BIMINI OR CONVERTIBLE TOP
IN THE CRUISE POSITION.
To Next Page
Loading...
