3
Equipment Operation
7. Press and hold the temperature buttons for the desired
cabin temperature. Press either button momentarily to
show current set point. Temperature range is from 60 to
85 degrees.
8. Check for a solid stream of water from the overboard
discharge.
9. Make sure there is steady air flow out of the air supply
grille.
AVOID POSSIBLE EQUIPMENT FAILURE.
DO NOT TURN THE UNIT OFF & ON
IMMEDIATELY. ALLOW AT LEAST 30
SECONDS FOR REFRIGERANT
PRESSURE EQUALIZATION.
10. The air conditioning system is programmed can be
programmed for various operating modes. See the ven-
dor supplied owner’s manual for changing the modes on
the elite control display panel.
11. Do not block the intake grill. It provides continued
air for the air conditioning system. Clean the filter monthly.
To Next Page
Loading...
