39
Equipment Operation
HELM SEAT (ADJUSTMENT)
The helm seat features a leaning bolster along with fore
and aft mobility. To adjust the helm seat follow these
steps:
1. To change the forward seat to the leaning bolster
postition, simply pivot the bolster 90 degrees to the full
stand up position. Make sure it is securely in place be-
fore sitting on it.
2. To change the fore and aft direction, pull the adjust-
ment rod to port while pushing or pulling the seat in the
direction you want to travel. When you release the rod
move the seat slightly to find the nearest detent.
3. To lock the seat activate the slider lock knob at the
port front seat side.
Fore & Aft
Adjustment
Rod
Pull Up To Use
Leaning Bolster
Slider Lock
To Next Page
Loading...
