49
Auxiliary Equipment Operation
FILLING THE STARBOARD ENGINE
1. Repeat each of the steps outlined in “Filling the Port
Engine” after switching the arrow-shaped tip on the valve
handle to the “STARBOARD ENGINE”.
2. When the oil pan nears its fi lled capacity, fl ip the pump
motor control switch to the “OFF” position and check
the proper oil level with the engine’s dipstick. If fi lling
is completed, place the fail-safe switch in the “OFF”
position.
FILLING THE GENERATOR
1. Repeat each of the steps outlined in “Filling the Port
Engine” after switching the arrow-shaped tip on the valve
handle to the “GENERATOR” engine.
2. When the oil pan nears its fi lled capacity, fl ip the pump
motor control switch to the “OFF” position and check
the proper oil level with the engine’s dipstick. If fi lling
is completed, place the fail-safe switch in the “OFF”
position.
To Next Page
Loading...
