31
Cosmetic Care & Maintenance
BATTERY PARALLEL SWITCH
If the battery parallel switch fails to operate, check the
breaker located above the push button switch. Always
fi nd the cause of the problem before resetting the circuit
breaker.
A second area to investigate is the battery solenoid located
in the engine room. When the switch is pressed the solenoid
energizes the appropriate second battery for additional
engine cranking capability.
Normally, if you hear a solenoid click it is operating
properly. Check all solenoid and battery connections for
tightness.
Battery Parallel
Solenoid
If the battery switch (DC distribution panel) should lose
power to one of the batteries, check the breakers close
to that battery switch. Look for a “popped breaker. The
above problem could be recognized by the appropriate
icon not being lighted at the DC distribution panel.
These breakers protect the charging/battery circuitry.
Always fi nd the cause of the overload before resetting
the circuit breaker.
BATTERY SWITCH PANEL
To Next Page
Loading...
