33
Cosmetic Care & Maintenance
CAMERA MONITORING SYSTEM
The optional cameras themselves are a sealed unit and
require no maintenance. The camera system on the other
hand needs periodic maintenance as outlined below:
1. Examine all cables for signs of damage such as chafi ng,
cuts or nicks.
2. Check all cables for tight connections.
3. Make sure the cameras are adjusted for the desired
view.
4. Spray the camera and lens with fresh water and wipe with
a soft lint-free cloth to remove salt deposits and debris.
Note: A 5 amp quick blow fuse protects
the camera system. It is located inside the
DC distribution panel. Access the panel by
removing the screws at the panel front.
To Next Page
Loading...
