How to fix disc errors during CD playback on my REI Car Receiver?
If you're experiencing disc errors during CD playback, it could be due to a scratched disc, dirty internal optics, or an extreme angle of operation. Try restoring the CD by removing any scratches and adjust the angle of operation to between 0°-30°.
Describes the function of the power button to turn the unit on/off.
Explains how to adjust volume and select functions using the knob.
Details how to change radio bands (FM1-FM3, AM1-AM2).
Explains how to select the audio source mode (RADIO, DISC, USB, etc.).
Describes using the reset button to clear system malfunctions.
Covers auto-programming stations and previewing stations.
Explains selecting preset stations and playback controls like PAUSE/PLAY.
Function of the mute button to silence audio output.
Buttons for manual tuning, seeking stations, and track control.
Describes front 3.5mm and rear RCA auxiliary inputs.
Location for inserting SD/SDHC cards for playback.
Button to cycle through display information.
Button for displaying and setting the time.
Slot for connecting USB drives for audio playback.
Button to eject a CD disc.
Instructions for turning the unit ON/OFF and status indicator lights.
How to adjust volume and navigate through audio settings.
Step-by-step guide to changing radio bands.
Selecting different audio source modes like RADIO, DISC, USB.
Procedure for clearing system errors using the reset button.
How to perform auto-scan programming and station preview.
Using buttons to select presets and advanced playback functions.
How to temporarily silence the audio output.
Manual tuning, seeking, and digital track navigation.
Connecting and using external audio devices via AUX inputs.
Inserting and playing music from SD/SDHC cards.
Cycling through display information for source and status.
How to display and set the current time.
Connecting USB drives for music playback.
Instructions for ejecting a CD.
Explains priority of PA mics over audio and other mics.
How to adjust volume levels for MIC 1 and MIC 2.
Notes on carbon mic volume being adjusted on the mic itself.
Visual guide for connecting the radio to power, speakers, and microphones.
Details on connecting Carbon, Dynamic MIC 1, and MIC 2.
Specifies the dash opening dimensions for proper fit.
Step-by-step guide for installing the radio into the dash.
Instructions and tools needed to safely remove the radio.
Solutions for when the power light does not turn on.
Troubleshooting steps for no sound from speakers.
Solutions for PA system not being heard or incorrect mic input.
Troubleshooting unsupported file types or disc errors.
Resolving locked front controls or display messages.
Details on operating voltage, current consumption, and power output.
Frequency range, sensitivity, and performance metrics for FM reception.
Frequency range and sensitivity for AM reception.
Performance metrics for CD playback, including audio quality and formats.
Specifications for USB standard, current, file system, and decoding.
Performance metrics for SD card interface including frequency response and dynamic range.
Details on max output level, output impedance, and subwoofer output.
Parameters for auxiliary inputs including frequency response and impedance.
General| CD Player | Yes |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Display | LCD |
| Tuner Bands | FM/AM |
| Maximum Power Output | 50W x 4 |
| Power Output | 22W x 4 |
| CD Compatibility | CD-R/CD-RW |
| AUX Input | Yes |
To Next Page
