Doc ID: 191-7913A
Tuning Note: (especially for 2-stroke owners):
• Once installed, if you desire your clutch to engage more
aggressively, one option is to purchase the heavier
Belleville spring from KTM (KTM calls it the “280”
spring).
• Replacing this spring makes the clutch engagement
more aggressive. However, this will increase the pull on
the clutch lever.
• The part number is KTM Part #: 78932005000
TOOLS NEEDED
• 4 mm hex key • Torque wrench
• 5 mm hex key • Fluid catch container
• 8 mm socket • Channel-lock pliers
• 27 mm socket • T-25 Torx bit (provided)
To Next Page
Loading...
