Reliable Controls MACH-ProCom - TECHNICAL SPECIFICATIONS; MACH-PROCOM GENERAL; MACH-PROCOM POWER; MACH-PROCOM COMMUNICATIONS

49
MACH-ProCom
USER GUIDE
TECHNICAL SPECIFICATIONS
MACH-PROCOM
™
/MACH-PROWEBCOM
™
 2007 − 2015 Reliable Controls
®
Corporation. All rights reserved.
TECHNICAL SPECIFICATIONS
MACH-PROCOM
GENERAL
POWER
COMMUNICATIONS
Processor 147MHz, 32-bit embedded microprocessor
Operating RAM 8 MB
Non-volatile Memory 1 MB
Firmware 4 MB Flash EPROM
256 MB Flash EEPROM (MACH-ProWebCom)
Software RC-Studio 2.0 update 1.86, or above
RC-Toolkit 2.0 update 2.66, or above
Time Real-time clock with 72-hour capacitor backup
Supply Voltage Class 2, 24 VAC 20 VA or 24 VDC 4 Watt power supply
Power Rating 20 VA maximum power consumption
Connector 2-pole K1 connector (24 VAC, GND)
Indication Status LED
Power Switch Toggle
Ethernet 10/100 Mbps maximum,
ISO 8802.3/IEEE 802.3, RJ 45
PC/Modem EIA-232 115.2 kbps maximum, RJ45
MSTP-Net EIA-485 76.8 kbps maximum, 2-pin removable connector
AUX-Net EIA-485 76.8 kbps maximum, 2-pin removable connector