Need help?Do you have a question about the Reliable Controls MACH-ProCom and is the answer not in the manual?
General| Brand | Reliable Controls |
|---|---|
| Model | MACH-ProCom |
| Category | Controller |
| Language | English |
Introduces the MACH-ProCom (MP-C) and MACH-ProWebCom (MPW-C) controllers.
Lists the items included in the MACH-Pro(Web)Com package.
Introduces material on physical layout, dimensions, and features.
Details the ports and their capabilities.
Lists supplementary features like real-time clock and flash backup.
Outlines the two models: MP-C and MPW-C.
Describes how to vertically mount the controller in an enclosure.
Describes the five independent communication ports on the controller.
Explains MS/TP protocol for BACnet Master/Slave devices.
Describes the six status LEDs and their indications.
Details using RC-Toolkit MSet tool for port configuration.
Configuration settings for the PC/Modem port in RC-Toolkit.
Steps to configure I/O-Net for expansion modules.
Configuration dialog for remote access setup.
Details processor, RAM, firmware, software, and time.
Specifies supply voltage, power rating, connector, and switch type.
Lists Ethernet, PC/Modem, MSTP-Net, and AUX-Net specifications.
To Next Page
