Reliable Controls MACH-ProCom - MS;TP-NET PORT; BACNET MAIN;SUB

17
Communications
USER GUIDE
MACH-PROCOM/MACH-PROWEBCOM
MACH-PROCOM
™
/MACH-PROWEBCOM
™
 2007 − 2015 Reliable Controls
®
Corporation. All rights reserved.
MS/TP-NET PORT
The MS/TP-Net port must be configured using the RC-Toolkit MSet application. The MS/
TP-Net port can be configured to one of four communication configurations:
Each of the above configurations utilizes the EIA-485 network standard described in the
EIA-485 Network Considerations section of this document.
BAC
NET MAIN/SUB
Enables MS/TP protocol communications for up to 126 Master devices or 200 Slave
devices. When defined as a Subnetwork, all Reliable Controls devices will use automatic
BACnet device numbering.
FIGURE 11: MS/TP-NET PORT CONFIGURED AS BACNET MAIN OR SUBNETWORK
• BACnet Main,
• BACnet Sub A,
• Modbus Slave, or
• Modbus Master.
MACH-Pro(Web)Com
MACH-ProZone
MACH-ProAir
SMART-Space Controller
AUX-Net