What causes the WaterPressureOpen error on my REMEHA Quinta Ace 135 Boiler?
The 'WaterPressureOpen' error on your REMEHA Boiler means the hydraulic pressure sensor is open. To address this: * Check the wiring and connectors for bad connections. * Ensure the sensor is correctly fitted. * If the sensor is faulty, replace it.
What to do if my REMEHA Quinta Ace 135 Boiler displays Warning Code A .00.00?
If a REMEHA Boiler displays Warning Code A .00.00, the controls will continue to operate, but you should investigate the cause of the warning.
What to do if my REMEHA Quinta Ace 135 Boiler displays error E .00.00?
If your REMEHA Boiler displays error code E .00.00, the controls will stop normal operation. The cause of the lock-out must be rectified, and the controls must be reset manually.
What to do if my REMEHA Boiler displays error H .00.00?
If your REMEHA Boiler displays error code H .00.00, the controls will stop normal operation and will check with set intervals if the cause of the blocking still exists. Normal operation will resume when the cause of the blocking has been rectified. Note that a blocking can become a lock-out.
What does WaterPressureClosed mean on my REMEHA Quinta Ace 135?
The 'WaterPressureClosed' error on your REMEHA Boiler indicates that the hydraulic pressure sensor is short-circuited. You can resolve this by checking: * Bad connection: check the wiring and connectors. * Ensure the sensor is correctly fitted. * If the sensor is faulty, replace the sensor.
What does Waiting For Configuration Number mean on my REMEHA Quinta Ace 135?
The 'Waiting For Configuration Number' error on your REMEHA Boiler indicates a configuration error or unknown configuration number. Reset CN1 and CN2 to resolve this.
What does TFlow Open mean on my REMEHA Quinta Ace 135 Boiler and how do I fix it?
The 'TFlow Open' error on your REMEHA Boiler indicates that the zone flow temperature sensor is open. This could mean: * The sensor is not present. * There is a bad connection: check the wiring and connectors. * The sensor is incorrectly fitted: check that the sensor has been correctly fitted. * The sensor is faulty: replace the sensor.
How do I troubleshoot a TFlow Closed error on my REMEHA Quinta Ace 135?
The 'TFlow Closed' error on your REMEHA Boiler means the zone flow temperature sensor is short-circuited. This could be due to: * The sensor is not present. * A bad connection: check the wiring and connectors. * An incorrectly fitted sensor: check that the sensor has been correctly fitted. * A faulty sensor: replace the sensor.
What to do if my REMEHA Quinta Ace 135 Boiler shows a Water Press Warning?
If your REMEHA Boiler displays a Water Press Warning, it indicates that the water pressure is too low. Check the water pressure.
Why does my REMEHA Quinta Ace 135 display Max Delta TH-TR error?
The Max Delta TH-TR error on your REMEHA Boiler indicates that the maximum difference between the heat exchanger and return temperature has been exceeded. This is often due to: * Insufficient or no flow: Check the circulation (direction, pump, valves). * Low water pressure: Check the water pressure. * A dirty heat exchanger: Check the cleanliness of the heat exchanger. * Air in the system: Check that the installation has been correctly vented to remove air. * Sensor error: Check that the sensors are operating correctly and that the sensor has been fitted properly.
To Next Page
General