To Next Page
L
Lindsey ScottSep 2, 2025
What causes External CSU Timeout in REMEHA Boiler?
- AAlan ConradSep 2, 2025
If there is an External CSU Timeout in your REMEHA Boiler, check the wiring and connectors. If the issue persists, replace the CSU.
What causes External CSU Timeout in REMEHA Boiler?
If there is an External CSU Timeout in your REMEHA Boiler, check the wiring and connectors. If the issue persists, replace the CSU.
Why is my REMEHA Quinta Ace 90 Boiler failing to connect function groups?
If your REMEHA Boiler is failing to connect function groups, it could be because the function group was not found. Try carrying out an auto-detect. If the issue persists, try restarting the boiler or replacing the CU-GH.
What does Waiting For Configuration Number mean in REMEHA Boiler?
If your REMEHA Boiler is Waiting For Configuration Number, it may be due to a configuration error or an unknown configuration number. Reset CN1 and CN2.
What does Configuration Error mean in REMEHA Boiler?
If your REMEHA Boiler is showing a Configuration Error, it may be due to a configuration error or an unknown configuration number. Reset CN1 and CN2.
What does Full Can Connection Matrix mean in REMEHA Quinta Ace 90 Boiler?
If there is a Full Can Connection Matrix on your REMEHA Boiler, it might be because the SCB was not found. Carry out an auto-detect.
What does Full Can Device Administration mean in REMEHA Quinta Ace 90?
If there is a Full Can Device Administration issue on your REMEHA Boiler, it might be because the SCB was not found. Carry out an auto-detect.
General| Model | Quinta Ace 90 |
|---|---|
| Category | Boiler |
| Output | 90 kW |
| NOx class | 5 |
| Type | Condensing Boiler |
| Weight | 80 kg |
| Fuel Type | Natural Gas |
| Installation Type | Wall Mounted |
Details the components and functions of the boiler's control panel, including buttons and display.
Instructions for setting up and customizing heating circuit parameters.
Details on configuring domestic hot water temperature and modes.
Details on configuring appliance parameters, heating curves, and screed drying programs.
Steps for commissioning the appliance, including chimney sweep and load tests.
Instructions for updating firmware, resetting, and restoring configuration settings.
Instructions on how to change appliance parameters for optimal performance.
Procedures for checking water pressure, ionisation, connections, and combustion analysis.
Guides on cleaning siphon, components, checking non-return valve, and boiler reassembly.
Details on error code levels (Warning, Blocking, Lock out) with causes and solutions.
