To Next PageTo Next PageWhat causes a fan operation error in a REMEHA Quinta Pro 30?
If there is a fan operation error in your REMEHA Boiler, check the wiring. Also, if the fan is defective, check for adequate draw on the chimney connection and replace the fan if necessary.
What should I do if there's a gas valve error in the SU PCB of my REMEHA Quinta Pro 30?
If there's a gas valve error in the SU PCB of your REMEHA Boiler, check the wiring. If the SU PCB is defective, check it and replace it if necessary.
What to do if my REMEHA Quinta Pro 30 has no release signal?
If your REMEHA Boiler shows no release signal, it could be due to an external cause; remove the external cause. It may also be due to a parameter error; check the parameters. Or, there could be a bad connection; check the wiring.
What does it mean if the parameter storage unit PSU is not found in my REMEHA Quinta Pro 30?
If the parameter storage unit PSU is not found in your REMEHA Boiler, it could be due to a bad connection. Check the wiring.
What to do if shutdown input is in locked-out mode in REMEHA Quinta Pro 30 Boiler?
General| Model | Quinta Pro 30 |
|---|---|
| Category | Boiler |
| Type | Condensing Boiler |
| Output | 30 kW |
| Fuel | Gas |
| Warranty | 2 years |
| Fuel Type | Natural Gas |
| Efficiency | 98% (GCV) |
