What to do if flow temperature sensor has open circuit in REMEHA Quinta Pro 65 Boiler?
If the flow temperature sensor has an open circuit in your REMEHA Boiler, check the wiring for bad connections. Also, check that the sensors are operating correctly and that the sensor has been correctly fitted. Replace the sensor if necessary.
How to troubleshoot return temperature sensor open circuit in REMEHA Quinta Pro 65 Boiler?
If the return temperature sensor has an open circuit in your REMEHA Boiler, check the wiring for bad connections. Also, check that the sensors are operating correctly and that the sensor has been correctly fitted.
Why does REMEHA Quinta Pro 65 Boiler have maximum difference between the flow and return temperature exceeded?
If the maximum difference between the flow and return temperature is exceeded in your REMEHA boiler, it could be due to no flow or insufficient flow, or a sensor error. Check the flow (direction, pump, valves), the water pressure, that the sensors are operating correctly, that the sensor has been fitted properly, and the cleanliness of the heat exchanger.
How to fix REMEHA Quinta Pro 65 maximum flow temperature exceeded?
If the maximum flow temperature is exceeded in your REMEHA boiler, it could be due to no flow or insufficient flow. Check the flow (direction, pump, valves) and reasons for the heat demand.
What to do if the water pressure is too low in my REMEHA Quinta Pro 65 Boiler?
If the water pressure is too low in your REMEHA Boiler, you should check the water pressure. Also, fill the boiler and the installation with water.
What to do if REMEHA Boiler gas pressure is too low?
If the gas pressure is too low in your REMEHA boiler, it might be due to insufficient flow or an incorrect setting on the gas pressure switch (Gps) on the SCU PCB. Check that the gas valve is fully opened, check the gas supply pressure, check whether the Gps has been correctly fitted, and replace the Gps switch if necessary.
What causes REMEHA Quinta Pro 65 Boiler to have five failed burner starts?
Five failed burner starts in your REMEHA boiler can be caused by no ignition spark. To solve this, check the cabling of the ignition transformer, the ionization/ignition electrode, breakdown to earth, the condition of the burner cover, the earthing, or a defective control SU PCB.
What to do if REMEHA Quinta Pro 65 flow temperature sensor is short circuited?
If the flow temperature sensor is short-circuited in your REMEHA boiler, it may be due to a bad connection or the sensor not being connected properly. Check that the sensor has been fitted properly, ensure the sensors are operating correctly, and replace the sensor if necessary.
Why does REMEHA Quinta Pro 65 Boiler have maximum increase of the flow temperature exceeded?
If the maximum increase of the flow temperature has been exceeded in your REMEHA boiler, it could be due to no flow or insufficient flow, or a sensor error. Check the flow (direction, pump, valves), the water pressure, that the sensors are operating correctly, that the sensor has been fitted properly, and the cleanliness of the heat exchanger.
What causes REMEHA Quinta Pro 65 Boiler temperature of heat exchanger to be too high?
If the temperature of the heat exchanger in your REMEHA boiler is too high, it could be due to a bad connection, the sensor not being connected correctly, or no circulation. Check that the sensors are operating correctly, that the sensor has been fitted properly. If necessary, replace the sensor. Vent the air from the CH system, check the circulation (direction, pump, valves), the water pressure and the cleanliness of the heat exchanger. Also, if present, check the boiler type parameter setting.
Safety instructions for installers and end users regarding gas and flue gases.
Recommendations for safe use, installation, maintenance, and handling of the appliance.
Details on manufacturer's, installer's, and user's responsibilities.
Explains danger levels and symbols used in the manual for safety and clarity.
Lists abbreviations used in the manual for technical terms.
Information on certifications, NOx class, and connection types.
Detailed technical specifications including outputs, inputs, and efficiencies.
Diagrams and measurements for boiler dimensions and connection points.
Wiring diagram illustrating electrical connections and component identification.
Key characteristics of the Quinta Pro boiler, including efficiency and emissions.
Explains how the boiler functions, including pump, cascade, water flow, and calorifier.
Identifies and labels the primary physical components of the boiler.
Details on control panel keys, symbols, and display meanings.
Requirements and qualifications for installers, including Gas Safe registration.
Guidelines for selecting an appropriate and safe installation site for the boiler.
Specific instructions and safety warnings regarding the physical placement of the boiler.
Requirements for ventilation in accordance with relevant standards and regulations.
General statement that installation must be by a qualified installer following regulations.
Steps for preparing the installation, including positioning the boiler and mounting bracket.
Procedures for connecting water pipes, including system flushing and specific connections.
Instructions for safely connecting the gas supply to the boiler, including safety checks.
Details on flue gas connection types, classification, and installation requirements.
Guide to connecting the boiler's control unit, power supply, and other electrical components.
Introduction to the commissioning process and safety warnings.
Steps for checking and connecting the gas circuit, including pressure checks.
Checks for the hydraulic circuit, including siphon filling and water connections.
Step-by-step guide for initial boiler start-up and operation.
Procedures for adapting the boiler to different gas types and setting the gas/air ratio.
Instructions on operating the boiler via the control panel and understanding its display.
Procedure for safely shutting down the boiler for extended periods.
Explanation of the boiler's built-in frost protection and how to enhance it.
Detailed list of boiler parameters, their adjustment ranges, and factory settings.
Instructions on how to modify user-level and installer-level parameters.
Guidance on adjusting the maximum heat output for central heating.
How to read current operating values, hour counters, and status information.
Explanation of various status and sub-status codes displayed by the boiler.
Overview of boiler maintenance requirements and the automatic service message system.
How the boiler indicates service needs and how to reset service messages.
Routine checks and maintenance tasks for ensuring proper boiler function.
Procedures for specific replacement tasks, like the ionisation/ignition electrode.
Explanation of error codes, blocking codes, and their meanings.
How to access and clear the boiler's error memory and stored data.
Procedure for safe removal and disposal of the boiler by qualified personnel.
Guidelines for replacing defective or worn parts with original or recommended parts.
Exploded diagrams showing the different parts of the boiler for identification.
Product card with energy efficiency ratings and consumption data.
Statement confirming the unit's compliance with relevant European directives.
Information on connecting optional PCBs for enhanced functionality.
To Next Page
General