REMEHA Quinta Pro 65 User Manual

United Kingdom
en
Installation, user and service manual
Wall-hung gas condensing boilers
Quinta Pro
30 – 45 – 65 – 90 – 115

REMEHA Quinta Pro 65 Specifications

General

Brand	REMEHA
Model	Quinta Pro 65
Category	Boiler
Language	English

Summary

Safety

General Safety Instructions

Safety instructions for installers and end users regarding gas and flue gases.

Recommendations

Recommendations for safe use, installation, maintenance, and handling of the appliance.

Liabilities

Details on manufacturer's, installer's, and user's responsibilities.

About this Manual

Symbols Used

Explains danger levels and symbols used in the manual for safety and clarity.

Abbreviations

Lists abbreviations used in the manual for technical terms.

Technical Specifications

Homologations

Information on certifications, NOx class, and connection types.

Technical Data

Detailed technical specifications including outputs, inputs, and efficiencies.

Dimensions and Connections

Diagrams and measurements for boiler dimensions and connection points.

Electrical Diagram

Wiring diagram illustrating electrical connections and component identification.

Description of the Product

General Description

Key characteristics of the Quinta Pro boiler, including efficiency and emissions.

Operating Principle

Explains how the boiler functions, including pump, cascade, water flow, and calorifier.

Main Components

Identifies and labels the primary physical components of the boiler.

Control Panel Description

Details on control panel keys, symbols, and display meanings.

Before Installation

Installation Regulations

Requirements and qualifications for installers, including Gas Safe registration.

Choice of the Location

Guidelines for selecting an appropriate and safe installation site for the boiler.

Boiler Position

Specific instructions and safety warnings regarding the physical placement of the boiler.

Ventilation

Requirements for ventilation in accordance with relevant standards and regulations.

Installation

General

General statement that installation must be by a qualified installer following regulations.

Preparation

Steps for preparing the installation, including positioning the boiler and mounting bracket.

Water Connections

Procedures for connecting water pipes, including system flushing and specific connections.

Gas Connection

Instructions for safely connecting the gas supply to the boiler, including safety checks.

Air Supply/Flue Gas Connections

Details on flue gas connection types, classification, and installation requirements.

Electrical Connections

Guide to connecting the boiler's control unit, power supply, and other electrical components.

Commissioning

General

Introduction to the commissioning process and safety warnings.

Gas Circuit

Steps for checking and connecting the gas circuit, including pressure checks.

Hydraulic Circuit

Checks for the hydraulic circuit, including siphon filling and water connections.

Commissioning Procedure

Step-by-step guide for initial boiler start-up and operation.

Gas Settings

Procedures for adapting the boiler to different gas types and setting the gas/air ratio.

Operation

Use of the Control Panel

Instructions on operating the boiler via the control panel and understanding its display.

Shutdown

Procedure for safely shutting down the boiler for extended periods.

Frost Protection

Explanation of the boiler's built-in frost protection and how to enhance it.

Settings

Parameter Descriptions

Detailed list of boiler parameters, their adjustment ranges, and factory settings.

Changing the Parameters

Instructions on how to modify user-level and installer-level parameters.

Setting the Maximum Load for CH Operation

Guidance on adjusting the maximum heat output for central heating.

Displaying the Measured Values

How to read current operating values, hour counters, and status information.

Status and Sub-status

Explanation of various status and sub-status codes displayed by the boiler.

Maintenance

General

Overview of boiler maintenance requirements and the automatic service message system.

Service Message

How the boiler indicates service needs and how to reset service messages.

Standard Inspection and Maintenance Operations

Routine checks and maintenance tasks for ensuring proper boiler function.

Specific Maintenance Work

Procedures for specific replacement tasks, like the ionisation/ignition electrode.

Troubleshooting

Error Codes

Explanation of error codes, blocking codes, and their meanings.

Error Memory

How to access and clear the boiler's error memory and stored data.

Disposal

Removal/Recycling

Procedure for safe removal and disposal of the boiler by qualified personnel.

Spare Parts

General

Guidelines for replacing defective or worn parts with original or recommended parts.

Parts

Exploded diagrams showing the different parts of the boiler for identification.

Appendix

ErP Information

Product card with energy efficiency ratings and consumption data.

EC Declaration of Conformity

Statement confirming the unit's compliance with relevant European directives.

Optional Electrical Connections

Information on connecting optional PCBs for enhanced functionality.