Setting mode
4 operating modes are available: Hybrid mode,
Economic mode, Automatic mode and Holiday
mode.
1: Hybrid mode
The water is heated in combination with the heat
pump and electric heating coil.
Fig. 22: Hybrid mode
2: Economic heating mode
The water is heated exclusively in heat pump
mode. The electric heating coil can be additionally
activated manually
.
Fig. 23: Economic heating mode
3: Automatic mode
The controller switches the heat pump and where
applicable the heating coil on, depending on the
ambient air (suction air).
Fig. 24: Automatic mode
4: Holiday mode
It is possible to select this mode in order to go on
holiday for a certain period of time. The heat pump
is of
f during this period. It is possible to program a
date of departure and a date of arrival.
Fig. 25: Holiday mode
Before leaving the system, switch the heat
pump to holiday mode. In order to have hot
water available upon your return, program the
switch-on point 1 day in advance of your arrival.
For parameter settings, see
Ä
‘Setting the holiday
program’ on page 41
REMKO RBW PV series
32
To Next Page
Loading...
Need help?
General
