ENGINE AND PERIPHERALS
Specifications
10
10-29
Burnished crankshaft
In case of correction, the burnishing must remain intact
on 140˚ in the areas indicated by the arrows.
These zones are defined in sections (A) and (B), used
as examples.
Identification of crankshafts:
Normally aspirated engine
●
eight counterweights,
●
Burnished bushings and crankpins.
Turbocharged engine
●
four counterweights,
●
Burnished or non-burnished bushings and
crankpins according to model.
88007S
88006S
ProCarManuals.com
To Next Page
Loading...
