ENGINE AND PERIPHERALS
Overhauling the engine
10
10-77
For engines fitted with a piston base cooling rail, the oil
gallery mounting bolts (H) need a drop of Loctite
FRENETANCH. Do not add more, as too much
increases the risk of blocking the oil circulation around
the mounting bolt.
Engines 852 before n˚ 42 253
Check that seals (D) are present between the original
bolts (E) and the bearing bolt, oil filter side of bearings
2, 3 and 4.
If the engine does not have these seals, fit a seal (D)
and a cap (F) coated with Loctite FRENETANCH and
secure tightly using a 6 mm Allen key (200 mm long).
This is to prevent oil entering the cooling system.
86609R
86741R
ProCarManuals.com
To Next Page
Loading...
