ENGINE AND PERIPHERALS
Overhauling the engine
10
10-94
Refitting the sump
Metal sump
1
st
model:
Fit a cork or rubber gasket.
A 1
st
model
B 2
nd
model
2
nd
model:
Only fit a rubber gasket.
Aluminium sump
Fit a rubber gasket. The alignment of the cylinder block
and the sump must be respected (flywheel side) to
prevent the clutch housing from being damaged when
the gearbox is fitted to the engine.
The sump is refitted with a new gasket and tightened
to a torque of 1.4 to 1.7 daNm.
DI1051R 16580S
ProCarManuals.com
To Next Page
Loading...
