lighting:
see-me-home .......................................
(current page)
lights:
dipped beam headlights .......................
(current page)
lights:
side lights .............................................
(current page)
1.97
ENG_UD65105_2
Éclairages et signalisations extérieures (HJB - Renault)
“See-me-home lighting”
function
This function enables you to briefly
switch on the side lights and dipped
beam headlights (e.g. to provide light
when opening a gate).
With the engine and lights switched
off, the 2 ring in AUTO position (or, de-
pending on the vehicle, in 0 position)
pull the stalk 1 towards you: the side
lights and dipped beam headlights will
switch on for approximately 30 seconds
along with the
š and k warn-
ing lights on the instrument panel.
To increase this duration, you may pull
the stalk up to four times (total time re-
stricted to approximately two minutes).
On the instrument panel, the message
“lighting on _ _ _” followed by the re-
maining time will appear as confirma-
tion. You can then lock your vehicle.
To switch off the lights before they
switch off automatically, turn the 2 ring
to any position then return it to AUTO
position (or, depending on the vehicle,
to 0 position).
EXTERIOR LIGHTING AND SIGNALS (5/6)
2
1