Renault CAPTUR - Rear Bench Seat: Functions

rear bench seat..........................................
(up to the end of the DU)
rear seats
functions ..............................................
(up to the end of the DU)
3.35
ENG_UD80462_4
Banquette arrière : fonctionnalités (HJB - Renault)
To fold down the seatback
Ensure that the front seats are far
enough forward.
Before folding down a seatback:
– lower the headrest fully;
– place the seat belt in the belt guide A
and buckle the seat belt. This pre-
vents the seat belt from locking when
the seatback is lifted up again.
Rear bench seat: functions
Before moving the seatback, put
the seat belt in belt guide A to avoid
damaging it.
REAR BENCH SEAT: functions (1/2)
B
A
1
Pull the vane 1 and lower the seat-
back B.
Note: for safety reasons, the seat-
back B is equipped with a retaining
system. You may experience resist-
ance when handling.
To replace the seatback, proceed in
the reverse order to removal.
Raise the seatback again until it reaches
the locking joint of the seatback.
Be careful not to jam the safety strap
between the backrest and the parcel
shelf.
Check the operation of the seat belt.
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.