Renault CAPTUR - Vehicle Identification Plate

vehicle identification plates ........................
(up to the end of the DU)
6.2
ENG_UD77264_2
Plaques d’identification véhicule (HJB - Renault)
Vehicle identification plate
VEHICLE IDENTIFICATION PLATES
A
B
The information shown on the ve-
hicle identification plate should be
quoted on all correspondence or
orders.
The presence and location of the in-
formation depends on the vehicle.
Vehicle identification plate A
1 Manufacturer name.
2 EC design number or approval
number.
3 Identification number.
Depending on the vehicle, this
information is also given on
marking B.
4 MMAC (Maximum permissible
all-up weight).
5 MTR (Gross train weight: vehicle
fully loaded, with trailer).
6 MMTA (Maximum Permissible
Weight) front axle.
7 MMTA rear axle.
8 Reserved for related or additional
entries.
9 Diesel exhaust emissions.
Depending on the vehicle, this
information is not indicated on
the manufacturer’s plate but on
the engine smoke opacity label
➥ 2.18.
10 Paint reference (colour code).
A
9
7
8
10
5
1
2
3
4
6