5.35
ENG_UD61077_2
Balais d essuie-vitres (HJB - Renault)
WIPER BLADES: replacement (2/2)
Check the condition of the wiper
blades.
– clean the blades, windscreen and
rear screen regularly with soapy
water;
– do not use them when the wind-
screen or rear screen are dry;
– free them from the windscreen or
rear screen when they have not
been used for a long time.
C
To refit
To refit the wiper blade, proceed in re-
verse order to removal. Make sure that
the blade is correctly locked in position.
Rear screen wiper blade 5
Stalk in stop position (deactivated):
– lift the wiper arm 6;
– turn the blade horizontally 5 (move-
ment C) until it unclips;
– remove the blade by pulling it.
6
Before changing the rear
wiper blade, make sure the
stalk is in the stop position
(deactivated).
Risk of injury.
5
– In frosty weather, make
sure that the wiper blades
are not stuck by ice (to
avoid the risk of the motor
overheating).
– Check the condition of the wiper
blades. Replace the wiper blades
as soon as they begin to lose ef-
ficiency (approximately once a
year).
When changing the blade, when it
has been removed, do not let the
wiper arm fall against the window:
risk of breaking the window.
To Next Page
Loading...
