1.32
CHILD SAFETY: CHOOSING A CHILD SEAT MOUNTING (2/3)
The two rings 1 and 2 are located be-
tween the seatback and the seat base
of the seat and are identified by a mark-
ing.
Before installing an ISOFIX seat in the
rear at the side, please ensure that
you have retracted the seat belt buckle
3 between the seatback and the seat
base to give access to the lock 1. Make
sure that the seat is correctly fitted to
the locks 1 and 2.
Note: if you remove the ISOFIX seat,
remember to take out and reposition
the seat belt buckle 3.
1
2
3 3
No modifications may be
made to the component
parts of the restraint system
(seat belts, ISOFIX and
seats and their mountings) originally
fitted.
To Next Page
Loading...
