1.33
CHILD SAFETY: CHOOSING A CHILD SEAT MOUNTING (3/3)
The third ring 5 is used to attach the
upper strap on some child seats. The 4
belt should be positioned between the
seatback and the rear parcel shelf. To
do this, remove the rear parcel shelf
(refer to the information on the “Rear
parcel shelf” in Section 3). Attach the
hook to one of the 5 rings, identified
using the
± symbol.
Pull the belt 4 so that the back of the
child seat comes into contact with the
vehicle seatback.
4
5
It is imperative to attach the
child seat strap to the corre-
sponding ring. You must not
use any other fixing point
Do not use the child seat
if it may unfasten the seat
belt restraining it: the base
of the seat must not rest on
the buckle and/or catch of the seat
belt.
Check that the seatback
of the forward-facing child
seat is in contact with the
seatback of the vehicle
seat. In this case, the child seat may
not always rest on the seat base of
the vehicle seat.
The ISOFIX anchorage
points have been exclu-
sively designed for child
seats with the ISOFIX
system. Never fit a different type of
child seat, seat belt or other objects
to these anchorage points.
Check that nothing is obstructing
the anchorage points.
If your vehicle has been involved in
a road accident, have the ISOFIX
anchorage points checked and re-
place your child seat.
To Next Page
Loading...
