1.34
CHILD SAFETY: choosing a child seat mounting (2/2)
Check that the seatback
of the forward-facing child
seat is in contact with the
seatback of the vehicle
seat.
In this case, the child seat may not
always rest on the seat base of the
vehicle seat.
1
3
The two rings 1 are located between
the seatback and the seat base.
To ensure your child seat can be easily
fitted and locked on the rings 1, use the
access guides 2 supplied with the child
seat.
The third ring is used to attach the
upper strap on some child seats.
To attach the belt hook in the third ring,
lift cover 3.
Then, pull the belt so that the seatback
of the child seat comes into contact with
the seatback of the vehicle seat.
The ISOFIX anchorage
points have been exclu-
sively designed for child
seats with the ISOFIX
system. Never fit a different type of
child seat, seat belt or other objects
to these fittings.
Check that nothing is obstructing
the anchorage points.
If your vehicle has been involved in
a road accident, have the ISOFIX
fittings checked and replace your
child seat.
2
To Next Page
Loading...
