1.71
On vehicles fitted with this function,
control 1 allows you to adjust the height
of the beams according to the load.
Turn control 1 downwards to lower the
headlights and upwards to raise them.
The position for adjustment varies ac-
cording to the load and the type of
headlights. Refer to the following page
to see the type of headlights and proper
adjustment value.
For vehicles not fitted with control 1,
adjustment is automatic.
ELECTRICAL ADJUSTMENT OF THE DIPPED BEAM HEADLIGHTS (1/2)
1
If driving on the left in a left-hand
drive vehicle (or vice versa), drivers
must have the lights adjusted by an
authorised dealer for the duration of
the trip.
To Next Page
Loading...
