Renault Master - Page 111

oil change .............................................................. (current page)
oil change .............................................................. (current page)
mileage before service .......................................... (current page)
maintenance:
mileage before service ..................................... (current page)
Jaune Noir Noir texte
1.97
ENG_UD60258_2
Ordinateur de bord : paramètres de voyage (X62 - Renault)
TRIP COMPUTER AND WARNING SYSTEM: journey parameters (4/6)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
Interpreting the display selected
On-board computer with mileage-
before-service message
f) Service distance.
With the ignition switched on, the engine not running and
the display set to “Service Intervals”, press button 1 or 2 for ap-
proximately 5 seconds to display the mileage before service
(distance or time to the next service). When the distance value
approaches its limit, there are several possible scenarios:
– range less than 930 miles (1,500 km) or one month: the
message “Service Due” is displayed accompanied by the
nearest term (distance or time);
– range equal to 0 miles (0 km) or date of service reached:
the message “Service Required” is displayed accompanied
by the warning light
©.
The vehicle requires a service as soon as possible.
Service Intervals
Service Due in
40 000 km / 24 months
Service Due in
300 km / 24 days
Service Required
Reset: to reset the distance before the next service, press and hold button 1 or 2 for approximately 10 seconds until the display
shows the mileage before service permanently.
NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the
event of an oil change, both the distance before the next service and the next oil change should be reset.