Renault Master - Tool Kit

tool kit ................................................... (up to the end of the DU)
changing a wheel..................................(up to the end of the DU)
jack ....................................................... (up to the end of the DU)
puncture................................................(up to the end of the DU)
wheelbrace ........................................... (up to the end of the DU)
hubcap tool ............................................................(current page)
towing hitch............................................................(current page)
lifting the vehicle
changing a wheel .............................................(current page)
5.4
ENG_UD57058_1
blocs outils / enjoliveur (X62 - Renault)
Tool kit
TOOL KIT
Location of the tool kit
Tool kit 1 is located under the driver’s
seat.
To remove the tools, move the seat
forward and fold down the seatback
➥ 1.20 .
Contents of the tool kit
(depending on the vehicle)
– hydraulic jack 2;
– towing hitch 3;
– hubcap tool 4;
1
Do not leave the tools unsecured inside the vehicle as they may come
loose under braking. After use, check that all the tools are correctly
clipped into the tool kit, then position it correctly in its housing: risk of
injury.
If bolts are supplied with the emergency spare wheel, it is imperative that they are
used and that they are used for the emergency spare wheel only: refer to the label
affixed to the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances
should it be used for carrying out repairs underneath the vehicle or to gain access
to the underside of the vehicle.
Nothing should be placed
on the floor area in front of
the driver as such objects
may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
2
3
4
56
– wheelbrace 5;
– winch unlocking key 6;
– hexagonal extension piece 7;
– extension pieces 8;
– jack 9.
5
9
4
3
6
7
8