4.3
ENG_UD57048_1
capot moteur (X62 - Renault)
BONNET (2/2)
3
4
Closing the bonnet
Ensure that the windscreen wiper
blades are correctly positioned.
Place the stay 4 into its holder 5, hold
the bonnet in the middle and lower it to
about 20 cm above the closed position,
then release it. It will latch automatically
under its own weight.
Ensure that the bonnet is
properly locked.
Check that nothing is pre-
venting the catch from lock-
ing (gravel, cloth, etc.).
Opening the bonnet
Lift the bonnet and release the stay 4
from its holder 5. For your own safety, it
is very important to fix the stay into the
retainer 3 in the bonnet.
After any procedure in the
engine compartment, make
sure that you do not forget
anything (cloth, tools, etc.).
Otherwise, this may lead to engine
damage or cause a fire.
5
To Next Page
Loading...
