2.56
ENG_UD57029_1
Prise de mouvement (X62 - Renault)
Power take-off
POWER TAKE-OFF
Operating the function
With the vehicle stopped, the engine
idling, the gearbox in neutral:
– depress the clutch pedal;
– press switch 1. The warning light in-
corporated in the 1 switch appears;
– release the clutch pedal. The idle
speed increases to 1,200 rpm.
Operating faults
If the warning light incorporated in the 1
switch does not appear and the power
take-off does not start:
– with the clutch pedal depressed,
press switch 1 and release the clutch
pedal then repeat the procedure;
– or gradually release the clutch pedal.
Switching off the function
– Depress the clutch pedal;
– press switch 1. The warning light in-
corporated in the 1 switch goes out
after approximately two seconds.
When the power take-off is en-
gaged, do not change gear. If it be-
comes necessary to change gear,
you must first disconnect the power
take-off.
1
To Next Page
Loading...
