changing a wheel..................................(up to the end of the DU)
hubcap tool ...........................................(up to the end of the DU)
trims ......................................................(up to the end of the DU)
5.11
ENG_UD57060_1
Enjoliveurs (X62 - Renault)
Wheel trims
WHEEL TRIMS (1/2)
Wheel trim 2
(concealed wheel bolts)
Remove it using hubcap tool 1 (found
in the tool kit), by pushing the hook into
the opening located near the valve (to
reach the metal retaining wire located
behind the wheel trim).
To refit it, align it with the valve. Push the
retaining hooks, starting with side A on
the valve side, then B and C and finish
with the side opposite the valve D.
Central wheel trim 4
(concealed wheel bolts)
Remove it using hubcap tool 1, insert-
ing the tool into the recesses 3 pro-
vided.
To refit it, align it with the wheel bolts,
clip it in and check it is securely locked.
1
1
A
D
C
B
2
4
3
3
3
3
To Next Page
Loading...
