bulbs
changing ......................................... (up to the end of the DU)
changing a bulb .................................... (up to the end of the DU)
lights:
dipped beam headlights .................. (up to the end of the DU)
lights:
direction indicators ..........................(up to the end of the DU)
lights:
side lights ........................................(up to the end of the DU)
lights:
daytime running lights .....................(up to the end of the DU)
lights:
main beam headlights ..................... (up to the end of the DU)
5.21
ENG_UD57064_1
projecteurs avant : remplacement des lampes (X62 - Renault)
Main beam headlights
Remove the cover A and unclip the
bulb holder 1.
Bulb type: H1.
Note: once the bulb has been replaced,
ensure the cover is refitted correctly.
Headlights (changing bulbs)
HEADLIGHTS: changing bulbs (1/2)
Dipped beam headlights
Remove the cover B and unclip the
bulb holder 2.
Bulb type: H7LL.
Do not touch the bulb glass. Hold it
by its base.
Note: once the bulb has been replaced,
ensure the cover is refitted correctly.
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
To comply with current legislation,
or as a precaution, you can obtain
an emergency kit from an approved
dealer containing a set of spare
bulbs and fuses.
B
A
2
1
Please note when work-
ing close to the engine that
it may be hot. In addition,
the engine cooling fan may
start at any moment. The
warning light in the engine compart-
ment reminds you of this.
Risk of injury.
Before carrying out any
action in the engine com-
partment, you must switch
off the ignition. ➥ 2.3.
3
Direction indicators
Turn the bulb holder 3 a quarter turn to
the left.
To refit, turn the bulb holder a quarter
turn to the right.
Bulb type: PY21W.
To Next Page
Loading...
